Waring WSV16 Manual
                                                | |
8OPERATINGINSTRUCTIONSControl Panel:1. Power Button ( ): Touch and hold for 2 seconds to switchthe unit on or off.2. Memory Button: Select memory to program memory stationsM1–M5.3. LED Memory Stations M1–M54. Save Button: Saves user programmed settings.5. Water Temperature Indicator (Cº or Fº)6. Start Button ( ): Starts water circulator.7. TEMP Button: The temperature set range is between35°C/95°F and 90°C/194°F. Default temperature is: 60°C/140°F.8–9. (+/-) Buttons: Increases/decreases time or temp. For fastscroll, press and hold (+/-) buttons.10. TIMER (SET/START/OFF) Button: Set time from 00:00–99:00. Default time is 02:00. Hold timer button for 4 secondsto turn timer off, machine will remain on until manually shut off.Press timer again to default back to 02:00 minutes or to resettime, use +/- arrows.11. Time IndicatorTO SET THE MACHINE FOR USE1. Be sure the vessel contains water before starting the unit. Thewater must be over the minimum level (MIN) which is marked onthe side wall of the vessel. The unit will not start if water level isbelow the MIN line and will show error code E001.2. Plug the cord set into an electrical outlet.3. Hold the Power button ( ) for 2 seconds to turn the machineNOTE: Buttons are capacitive touch and onlyrequire a light tap with your finger to operate.11 10 9 8 7 612345 |
Related manuals for Waring WSV16
manualsdatabase
Your AI-powered manual search engine