Warmup UCG User Manual
Also see for UCG: Instructions
                    | |
4Type UCG/UDG English5 Press the Up or Down buttons until the required temperature flashes.6 Press the OK button.Please note: Override mode is a temporary temperature setting thatis cancelled automatically by the next event in the scheduled 4-eventprogram.OVERRIDEMODEChild LockI want to lock the thermostat menus to prevent the settings frombeing changed.To do so, you must activate the child lock:1 Press the OK button twice to activate the menu.2 Press the Up or Down buttons until the Settings option flashes.3 Press the OK button.4 Press the Up or Down buttons until the Childlock option flashes. Apadlock symbol will appear in the menu area and Off will flash in theupper part of the display.5 Press the Up or Down buttons until On flashes.6 Press the OK button.7 Select Exit to exit the option.To unlock the child lock again, proceed as follows:1 Press the OK button to activate the menu.2 Then press and hold the Up and Down buttons simultaneously forthree seconds.Factory setting: OFFSETTINGSCHILDLOCKTemperature UnitI want to change the temperature unit ( °C/°F) used in the display.To do so, you must:1 Press the OK button twice to activate the menu.2 Press the Up or Down buttons until the Settings option flashes.3 Press the OK button.4 Press the Up or Down buttons until °C/°F flashes in the menu area.The unit currently selected will flash in the upper part of the display.5 Press the Up or Down buttons until the required unit °C/°F flashes.6 Press the OK button.7 Select Exit to exit the option.Please note: Temperatures are displayed in Celsius with a resolution of0.5 degree and in Fahrenheit with a resolution of 1 degree.Factory setting: CelsiusSETTINGS C°/F°Setting TimeI want to change the time.To do so, you must:1 Press the OK button twice to activate the menu.2 Press the Up or Down buttons until the Settings option flashes.3 Press the OK button.4 Press the Up or Down buttons until the Time option flashes. Thecurrently selected 12 or 24 hour clock will flash in the lower part of thedisplay.5 Press the Up or Down buttons to select either 12 or 24 hour clock.6 Press the OK button. The hour will begin flashing in the lower part ofthe display.7 Press the Up or Down buttons to set the hour.8 Press the OK button. Now the minutes will flash.9 Press the Up or Down buttons to set the minutes.10 Press the OK button.11 Select Exit to exit the option.Factory setting: 24 hour clockSETTINGSTIMESetting DayI want to change the day of the week.To do so, you must:1 Press the OK button twice to activate the menu.2 Press the Up or Down buttons until the Settings option flashes.3 Press the OK button. |
manualsdatabase
Your AI-powered manual search engine