Warwick BC10 Owner's Manual

Contents

Warwick BC10 Owner's Manual Manual pdf 8 page image

BC10• Combo amplifier for bass instruments• Passive and active inputs• Class-A preamp with Low-Z circuitry for minimum noise andmaximum headroom• 10 watt power amp• 8” Warwick WXC 8/8 bass driver• 3-Way EQ with controls for bass, mid and treble• DDL (Dynamic Distortion Limiter) for distortion-free reproduction at all levels• Aux mini jack stereo input (iPod, MP3 player, CD player)• Self-cooling construction (fanless operation)• Dedicated stereo headphone amplifier• Bass reflex speaker cabinet• Protective speaker grille of rugged steel• Weight: 6,5 kgs / 13.2 lbs.• Dimensions: (W/H/D) 320mm x 250mm x 220mm / 12.6” x 9.8” x 8.7”TECHNICAL SPECIFICATIONS:Input sensitivity:Active input: 360mV/50K Ω Output Power: 10W @ 8 ΩPassive input: 110mV/500K Ω Frequency response: 20Hz-20kHz +/-0.5 dBAux input: 750mV/50K Ω THD less than 0.3% at rated output powerPower consumption: 22WTone controls:Bass: +/- 12dB @ 60Hz Speaker specifications:Mid: +/- 12dB @ 800Hz 8” Bass Driver: 10W, Impedance: 8 Ω, SPL: 90 dB,Treble: +/- 12dB @ 10kHz Frequency response: 80Hz - 10kHzGETTING STARTED1. Unpacking – Carefully unpack unit from the carton box.2. Connecting to power – Set the power switch in off position, connect the supplied power cord to the amplifier andthen connect the same cord into AC outlet of proper voltage.3. Setting front panel controls – Set VOLUME control to zero, all other controls should be settled to neutral, middleposition.4. Connecting instrument – Using an instrumental cable (shielded) connect your instrument to the proper ACTIVE orPASSIVE input. Turn all volume controls of your guitar to their maximum. Now press power switch on.5. Adjusting your individual settings – Set the VOLUME to the value you wish to play, you should now hear sound fromthe speaker. Adjust controls to your liking.8