Warwick Sweet 15.2 Owner's Manual

Also see for Sweet 15.2: Owner's manual

Contents

Warwick Sweet 15.2 Owner's Manual Manual pdf 5 page image

EENNGGLLIISSHHPROTECTIVE CIRCUITSHHFF oosscciillllaattiioonn:: This safety feature prevents from damages caused by frequencies above 20 kHz (feedback, etc.) byswitching the power amp off.TTeemmppeerraattuurree:: Should the temperature controlled fan cooler prove to be insufficient in extreme conditions, this circuitprotects the output stage transistors from destruction by switching the device off.DDiirreecctt ccuurrrreenntt ((DDCC)):: This circuit continuously monitors the power amp output for direct current and protects the loud-speakers from overload in case a transistor burns out.GETTING STARTED1. Make sure that the mains lead is connected and all external devices (effects) are properly connected and working.2. Set the MMAASSTTEERR control to zero.3. Plug your bass guitar into the amplifier's IINNPPUUTT using a shielded cable.4. Press the PPOOWWEERR switch to turn the device on.5. Switch off MMUUTTEE - the red LED will turn off.6. Turn up all volume controls of your bass guitar.7. Adjust the GGAAIINN control until the clip LED flashes.8. Set MMAASSTTEERR contol to your desired volume.9. Use the sound controls / switches to adjust the sound as described in the respective chapters FRONT PANEL CONTROLS.10. If necessary readjust the GGAAIINN.6