Wascomat EX618 Service Manual

Wascomat EX618 Service Manual Manual pdf 76 page image

76 I/O modules620418196204620421658022181920CODE:10103554YOUR PASSWORD0000ADDRESS I/O BOARD10.01.00.00I/O BOARD 1I/O BOARD 2I/O BOARD 3I/O BOARD 4I/O BOARD 5Addressing I/O modulesAfter replacing an I/O module or in instanceswhere a second module has been added to awashing machine, the new I/O module must beaddressed in order to activate its function op-tions. The function options of the module arecontrolled by the parameter software loaded onthe relevant program device.• Engage the machine's service mode.• Highlight the I/O ADDRESS line in the mainmenu and press the knob.The display will now show an 8-digit code.• Call authorised service and quote the code.Authorised service will then assign a pass code.• Enter the code you have been given andpress the knob.The I/O ADDRESS menu will appear in the dis-play.• Select wether an I/O module shall be addres-sed or removed.• If addressed, highlight the I/O module andpress the knob.• Press the service switch on the I/O moduleindicated in the display.• Where multiple I/O modules are to be add-ressed, repeat the procedure for the relevantmodules.• Exit the service program.• If removed, follow the instructions on thescreen and press the service switch on theI/O module to be removed.• Where multiple I/O modules to be removed,repeat the procedure for the relevant modu-les.• Exit the service program.21MAIN MENU08.00.00.00RESET TO FACTORYACTIVATE WASH PROGR.QUICK START BUTTONSI/O ADDRESSPRICE PROGRAMMINGEXIT62042022I/O ADDRESS10.01.00.00ADDRESS I/O BOARDREMOVE I/O BOARDEXIT