Watchguard DVR4ENTPACK3 User Manual

Contents

Watchguard DVR4ENTPACK3 User Manual Manual pdf 10 page image

Advanced Configuration- 10 -Advanced Config > CameraTitleThis option allows you to create a name for the camera, up to six (6) characters.Brightness / Contrast / Saturation / HueThis option allows you to modify these four values for the camera.CovertThis option allows you to hide a camera from display. It will still record, but will only show during playback.RecordThis option allows you to configure whether to record this camera or leave it as display only.Advanced Config > DetectionAdvanced Config > Detection > Detection SetupTitleDisplays the titles of the cameras.DetectionThis option enables/disables motion detection for this individual camera.AreaPress ENTER to setup area masking for this camera.Note: The Advance menu of the DVR should be used by enthusiasts or experts only. Changing settings in thissection of the menu can drastically alter the performance and functionality of the DVR. It is recommended you donot change anything in this section unless you know what you are doing.DDEETTEECCTTIIOONNDETECTION SETUPDETECTION TIMERAADDVVAANNCCEEDD CCOONNFFIIGGCAMERADETECTIONALERTNETWORKDISPLAYRECORDDDEETTEECCTTIIOONNTITLE DET AREA LS SS TS RE01 ON SETUP 07 03 02 1002 ON SETUP 07 03 02 1003 ON SETUP 07 03 02 1004 ON SETUP 07 03 02 10