Watchguard Firebox T35 Hardware Manual

Also see for Firebox T35: Quick start guide Hardware guide

Contents

Watchguard Firebox T35 Hardware Manual Manual pdf 7 page image

AttnThe Attn indicator is yellow when you start the device with the Reset button pressed. For moreinformation, seeRestore Factory Default Settings.Power ( )The Power indicator is lit to indicate power status. It is green when the Firebox is powered on.RearRear view of the Firebox:Serial Port (Console)The leftmost port is an RJ45 serial console port. An RJ45 serial cable is not included with the device.USB InterfacesThe device includes two USB interfaces. Connect a USB storage device for USB backup andrestore, or to store a support snapshot. For more information, see Explore Fireware Help.Network InterfacesThe Ethernet interfaces have standard RJ45 connectors and support link speeds of 10, 100, or 1000Mbps.The Firebox T35/T35-W has five network interfaces. These interfaces are labeled 0/WAN, 1/LAN, 2,3, 4-PoE. Interface 4 is a PoE+ (Power over Ethernet) interface, compliant with the IEEE 802.3atstandard.Reset ButtonThis resets the device. To restore the device to factory default settings, seeRestore Factory DefaultSettings.Power SwitchControls the power supplied to the device. Move the switch to position 1 to power on the device, orposition 0 to power it off.Power InputAn AC power adapter is included with your device. Connect the AC adapter to the device and to apower source. The power supply tip is plus (+) polarity. Use only the supplied AC power adapter.WatchGuard Firebox T35 and T35-W Hardware Guide4WatchGuard Technologies, Inc.

/ 9

Related manuals for Watchguard Firebox T35