Watchguard XTM 515 Hardware Manual

Contents

Watchguard XTM 515 Hardware Manual Manual pdf 6 page image

4 WatchGuard XTM 5 SeriesHardware SpecificationsFront ViewThe front of the device.This is a close-up of the right side of the front of the device.LCD indicator panelDevice status information appears on the LCD screen. Press the buttons below the screen to changethe information that appears on the screen.For more information, see “Use the LCD Interface” on page 8.LCD console buttonsPress the LCD console buttons to see status information and start recovery procedures.To boot the device in safe mode, press and hold the down arrow button when you power on thedevice.For detailed information about the LCD indicator panel and the LCD console buttons, see “Use theLCD Interface” on page 8.Power ( )When the device is powered on, the power indicator is green.Arm/DisarmWhen the device is armed, this indicator is green. When the device is disarmed, this indicator is red.Storage ( )When there is activity on the compact flash, this indicator is yellow.All interfaces are on the front of the device.Serial port (Console)An RJ45 connector for the serial interface.