WaterLogic WL400 Operating, Installation And Service Manual

Also see for WL400 Series: Manual Service manual Troubleshooting Installation procedures

PROGRAMMING INSTRUCTIONSThe above picture shows front dispensing panel for the Waterlogic WL400 .Press and Hold all 4 dispensing buttons for 10 seconds.There are 5 options in the menu.Cold Button cycles down the menuAmbient Button cycles up the menuHot Button Selects the OptionExtra Hot Button Exits the menuSettings ProgrammingF-S Filter Setting Filter Setting can be adjusted between 1,000 to 9,000gallons in 1,000 increments.F-r Filter Resetting Choices are Yes or NoC-S Cold Temperature Setting Temperature Setting can be adjusted from 37°F to 54°F(2.7°C to 12.2°C)H-S Hot Temperature Setting Temperature Setting can be adjusted from 158°F to 203°F(70°C to 95°C)S-S Sleep Mode Choices are 3 Hour, 6 Hour, 12 Hour or No (Off)WL400 Operating, Installation, and Service Manual Page 24 - Revision: 5-29-2015