Wave wifi Rogue Wave Quick Start Manual
    |
Copyright Wave WIFI Inc., 2017. All rights reserved.AVEWiFiOn the Water and OnlineRogue Quick Start GuideDid you get all of your accessories?POEInjector Mount(not includedwith Rogue Pro)Cigarette adapterPower Adapter CAT5eEthernet CableAntennaHOW TO CONFIGURE / OPERATE:1. Plug one end of the ethernet cable provided into the base of the unit.*For Rogue Wave seal the ethernet hole with the white rubber grommet provided*2. Plug the other end of the ethernet cable into the POE (Power Over Ethernet) injector.3. Plug the power supply into the POE injector (Both lights on the POE should show solid green).4. Plug the POE injector into the ethernet port of a laptop, computer or router.*When plugging into a router it will be the “internet” or “WAN” port.*Connec�ng wirelessly with Onboard Router:1. Connect wirelessly to the router that the Rogue unit is physically connectedto via laptop, tablet or smartphone.2. Open a browser and at the top URL bar type: 192.168.89.13. Once on the interface page of the unit, click on a network and type in apassword if needed.4. The connec�on should read “(Three dots)..., Checking IP, Got Internet”.Connec�ng directly via ethernet port with Laptop:1. Turn off the wireless capability of the laptop (if needed).2. Open a web browser and at the top URL bar type: 192.168.89.13. Once on the interface page of the unit, click on a network andtype in a password if needed.4. The connec�on should read “(Three dots)..., Checking IP, GotInternet”.***Wave WiFi suggests Initial setup be with a Laptop.***NOTE: While the unit’s light-weight, compact, weather resistant design makes it the ideal portable Ethernet converter/Wireless Bridge for temporaryInternet access, prolonged exposure to the elements may cause premature deteriora�on of the internal circuitry and shorten the life of the unit. TheUnit’s Warranty Policy specifically states that the warranty is void if the failure is a�ributable to misuse, mishandling, improper installa�on, altera�on(including removing or oblitera�ng labels) and opening or removing external covers.Laptop ComputerEthernet end plugs into laptop or router.Power adapter plugsinto wall socket.Plug the end of the walladapter into the input ofthe POEWall SocketCigarette adapter (OPTIONAL)Plug the cigaretteadapter into apower source.Plug the end ofthe cigaretteadapter into thePOE input.CAT5e plugs intoethernet base ofRogue unit. Andethernet end of POE.Rogue UnitRogue WaveAVEWiFiFCC ID: 2ALM9WWRRESET12V - 1APOETE000000ROGUEM/N: WWRRogue Pro & Pro DBAntenna screwsonto the Rogueunit.*Mount not included*The Rogue Pro has ascrew on 1” - 14thread base.(1st) Detach the baseand screw it onto amount BEFOREplugging in theEthernet cable.(2nd) Plug theethernet cable intothe ethernet port ofthe Rogue.Ethernet port on thebase of the Rogueunit.*Rubber grommetprovided*Rogue Wavemount.Screw onbase.**NOTE**Light sequence for 2.4GHz Rogue Wave& 2.4GHz Rogue Pro only.Be sure when mounting the Rogue that it is between15 - 25ft off the water.Ensure that the cable run is no longer than 60ft. If you gobeyond 60ft the Rogue may not function correctly.The Rogue must be mounted vertically with the antenna up.Do not mount next to Radar.QuickTips:Page 1Version Bravo |
Related manuals for Wave wifi Rogue Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine