Wave wifi TIDAL WAVE Quick Start Manual
Also see for TIDAL WAVE: Quick start guide
    |
Page 1Connecting directly via ethernet port with Laptop:1.) Open a web browser and type in 192.168.89.1 in the URL bar at the top.2.) From the network scan page, connect to a network that you are familiar with.3.) The connection should read, “(Three dots)..., Checking IP, Got Internet”.Connecting wirelessly with a Router:1.) Connect wirelessly to the router that your EC unit is PHYSICALLY connected to via laptop, tablet or smartphone.2.) Open a browser and at the top URL bar type: 192.168.89.13.) Once on the interface page of the unit, click on a network and type in a passowrd if needed.4.) The connection should read “(Three dots)..., Checking IP, Got Internet”.HOW TO CONFIGURE / OPERATE:1. Plug one end of the ethernet cable provided into the ethernet port of the unit.2. Plug the other end of the ethernet cable into the POE (Power Over Ethernet) injector.3. Plug the power supply into the POE injector (Both lights on the POE should show solid green).4. Plug the POE injector into the ethernet port of a laptop, computer or router.*When plugging into a router it will be the “internet” or “WAN” port.*Copyright Wave WIFI Inc., 2018. All rights reserved.AVEWiFiLaptop ComputerEthernet end plugs into laptop or router.Power adapter plugsinto wall socket.One 3’ Antenna Per Wi Fi Frequency.One for 2.4GHz and One for 5GHz.Both antennas are Dual Band.One Wi-Fi Rubber duck antenna perfrequency. One for 2.4GHz and One for5GHz. Both antennas are Dual Band.Wirelessly connect to youronboard router and Manage yourTidal Wave network sources allfrom one comprehensive browserbased interface.Plug the end of the walladapter into the input ofthe POEWall Socket1 Gig PoE Ethernet PortOne MainCellular AntennaOne SecondaryCellular AntennaFrequencies Goingto ShoreFrequencies FromShore to ShipScanStatsSettingsWeatherSocial MediaFavorites-55 dBm-0 dBm-0 dBm-75 dBm-13 dBmChannel: 0 Mobile Data 1Mobile Data 2XfinityATT5gwYhrXWaveWiFi APChannel: 0Channel: 6Channel: 11Channel: 11Connection: Mobile Data 1IP: 10.58.77.12 (DHCP)Internet: VerizonNOTE: If you have mobile broadband devices installed andneed to reset them (i.e. adding and/or removing SIM cards,etc.), please disconnect any existing connections below, thenclick on the red “X” next to “Internet:” on the top right to resetthe devices.Available wireless networks(32)Channels GraphSort networks by:Signal strength only Security, then signalCurrent connection (Click here to disconnect.)AVEWiFiTMWhen connecting the cables be sure that youcheck that all connections are making contact.If there is no connection between the centercore of the antenna cable and the pin of the “N”connector there will be poor receptionperformance from the system.Ethernet CableMain & Secondary5GHz AntennaMain & Secondary2.4GHz AntennaMain & SecondaryCellular AntennaWi-Fi SignalCell Tower SignalWi-Fi SignalBack View of Tidal WaveQuick Tips1. Wave WiFi suggests not using Internet Explorer as abrowser to manage Wave systems.2. Type in the APN of your cellular provider BEFOREinserting the SIM. See Page 3.3. WE SUGGEST NOT FAVORITING YOUR “MOBILEDATA 1” CONNECTION. Favoriting this connection couldresult in excessive data charges on your cellular plan.4. Power cycle the system when changing out SIM cards.5. Lowering the transmission power on the settings pagecan sometimes improve connection in a crowded marina.Did you get all of your accessories?***Wave WiFi suggests Initial setup be with a Laptop.***x2 - 3ft Dual Band AntennasPoE Injectorx2 Dual Band Wi-Fi RubberDuck Antennas25ft CAT5e CableSmall Cellular SMA AntennaCell Antenna + Cable with SMAx2 Ultra Flex 400 Low Lossx2 Spare N ConnectorsAVEWiFiTIDAL WAVEQuick Start Guide |
Related manuals for Wave wifi TIDAL WAVE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine