TIDAL WAVEQUICK START GUIDE4828 NE 12th Avenue, Oakland Park, Florida 33334-4804 • 1.954.928.1310 • support@wavewifi.comPage 1How to Configure/Operate1. Plug one end of the ethernet cable provided into the ethernet port of the unit.2. Plug the other end of the ethernet cable into the PoE (Power Over Ethernet) injector.3. Plug the power supply into the PoE injector (Both lights on the PoE should show solid green).4. Plug the PoE injector into the ethernet port of a laptop, computer or router.TIP: When plugging into a router it will be the Internet (WAN) port.Connecting to Internet via physical connection1. Open a web browser and type in 192.168.89.1 in the URL bar at the top.2. From the network scan page, connect to a network that you are familiar with.3. The connection should read, “(Three dots)..., Checking IP, Got Internet”.CellularAntenna1 Gig PoEEthernet Port2.4GHzAntenna5GHzAntennaPowerPowerMainDirect ethernet connectionWi-Fi Antennas must bemounted 15 - 25ft off thewaterline.Cat5 Ethernet CableSec.DataDataDataPorts 2, 3, and 4 are WAN ports.Ports 1 and 5 are LAN ports.DataCat5 Ethernet CableCat5 Ethernet CableCat5 Ethernet CableInsert SIM Card with Notch in first andContacts faced up toward blue light.ContactData OnlyNon-E911 SIMNotchx2 Dual Band AntennasPoE Injectorx2 Spare N Connectorx2 Wifi AntennaCat5e Ethernet CableCell Antenna Kitx2 Low Loss 400 Cable12V Power SupplyCellular AntennaAccessories