Waves Multimaximizer L3-LL User Manual

Contents

Waves Multimaximizer L3-LL User Manual Manual pdf 15 page image

L3-LL User Manual15Band Controlshe Band Controls section features controls over the Crossover network which splits the input intor displaying theput level.Se r- R g- Defaugless overlap between the bands.CrossoveJust below tL3-LL. Eac eEach of theLOW Range:O MID Range: 150Hz to 300Hz. Default to 320Hz.I MID Range: 1000Hz to 5000Hz. Default to 1278Hz.I Range: 3kHz to 11kHz. Default to 5113Hz.er Band SoloSolo the frequency band to adjust the frequency bandwidth. Solo outputs the signal post the crossoversand pre the dynamic process.TFrequency Bands. Each Band has controls for Solo, Gain, Priority, Release, and a Meteinpa ationan e 0 to 100lt 100Separation is similar to a filter cutoff slope (or Q) between the bands’ sidechain being fed to thePLMixer™. At low Separation settings, crossover slopes between bands are moderate, creating moreoverlap between the bands. At higher Separation settings, the crossover slopes are steeper, resultininr (Xover) Controlshe graph are the Crossover frequency adjustment controls. There are 4 Crossovers in theh s ts the cutoff frequencies for the corresponding High Pass and Low Pass filters.four Crossovers has a unique range of frequencies, as follows:20Hz to 350Hz. Default to 80Hz.LHWHP