D Mode CT User Guide 27 Copyright © 2005 WaxessPress FLASH/DEL to answer the new call.Press FLASH/DEL again to return to thefirst call.If the current call is on the CEL line andanother call arrives also on the CEL line,a “C” blinks in the display.If the current call is on a CEL line and the new call is on the TELline, the “C” remains solid, and the “T” indicator blinks.If you receive a call waiting signal during the conference call,press FLASH to answer the call.Check the logPress to scroll through the log from newest to oldest. Press to scroll through the log from oldest to newest. The log holds upto 50 entries.Dial a number1 Scroll to a name/number displayed, and press Select twice.The number appears in the display.If the number’s area code is the same as an area code storedin the phone memory (see “Area codes” on page 10), the areacode may not appear. If the area code is required for dialing,press # to add the area code to the number. If the number 1is also required for dialing, press * to add 1 to the beginningof the number.2 Press CEL or TEL to make the call.Save a number1 Scroll to a name/number displayed, and press Select.2 Scroll to Save, and press Select.3 Enter a name if needed (see “Enter names and characters” onpage 18) and press OK.4 Edit the number if needed and press OK.The Distinctive Ring menu appears.5 Scroll to the setting you want and press OK.The Speed Dial menu appears.New callD mode CT user guide final.book Page 27 Tuesday, May 24, 2005 6:57 PM