Wayne-Dalton 8000 SERIES Installation Instructions And Owner's Manual

Also see for 8000 Series: Installation instructions and owner's manual Installation instructions and owner's manua Installation instructions and owner's manual Quick start guide Installation instructions and owner's manual

Contents

Wayne-Dalton 8000 SERIES Installation Instructions And Owner's Manual Manual pdf 4 page image

4Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to yourlocal yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.comTools Needed:1/4”- 20 x 7/8” SELf DRILLINGSCREWS (AS REquIRED)1/4”- 20 x 5/8”CARRIAGE BOLTS(AS REquIRED)5/16” x 2” hEx hEAD LAG SCREWS(AS REquIRED)(2) 3/8”- 16 x 3/4”hEx hEAD BOLTS1/4”- 20 hEx NuTS(LIfT hANDLE)1/4”- 20 fLANGED hExNuTS (AS REquIRED)(2) 3/8”- 16hEx NuTS 1/4”- 14 x 5/8” SELf TAPPINGSCREWS (AS REquIRED)(2) #10 PhILLIPShEAD SCREWS (2) 1/4”- 20 x 5/8”TAMPER-RESISTANTSCREWS(2) 1/4” x 2-1/2” CARRIAGE BOLTS (LIfT hANDLE)Package Contents Continued...(2) #8 x 1-5/8” SELf TAPPING SCREWS(STEP PLATE)The bOTTOM SECTION can beidentified by the factory attachedbottom astragal and the bottom bracketwarning labels on each end stile. Thissection is always the 1st section onfour and five section doors.The lOCk SECTION may have a yellowand black warning label on the rightside of the section. This section isalways the 2nd section on four and fivesection doors.The INTERMEDIATE I SECTION mayhave a warning label attached to eitherright or left hand endstile of the section.This section is always the 3rd sectionfrom the bottom of the door.The INTERMEDIATE II SECTION isalways the 4th section on five sectiondoor.The TOP SECTION is always the 4thsection on four section door and the 5thsection on five section door.Door Section IdentificationTOP SECTIONINTERMEDIATE II SECTION (5 SECTION DOORS ONLy)LOCk SECTIONBOTTOM SECTIONBOTTOM BRACkETWARNING LABELSASTRAGALWARNING LABELINTERMEDIATE I SECTION1/4”-20 x 11/16” SELf DRILLINGSCREWS (AS REquIRED)