Wayne-Dalton 8000 Series Installation Instructions And Owner's Manual

Also see for 8000 Series: Installation instructions and owner's manual Installation instructions and owner's manual Installation instructions and owner's manua Installation instructions and owner's manual Quick start guide

Contents

Wayne-Dalton 8000 Series Installation Instructions And Owner's Manual Manual pdf 4 page image

4Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to yourlocal yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.comTools Needed:1/4”- 20 x 5/8” CARRIAGEbOLTS (AS REqUIRED)The boTTom SecTioN can beidentified by the factory attachedbottom astragal, or by the bottombracket warning labels on each endstile. This section is always the 1stsection on four and five section doors.The lock SecTioN may have a yellowand black warning label on the rightside of the section. This section isalways the 2nd section on four and fivesection doors.The iNTeRmeDiaTe i SecTioN mayhave a warning label attached to eitherright or left hand endstile of the section.This section is always the 3rd sectionfrom the bottom of the door.The iNTeRmeDiaTe ii SecTioN isalways the 4th section on five sectiondoor.The ToP SecTioN is always the 4thsection on four section door and the 5thsection on five section door.Door Section identification5/16” x 2” hEx LAGS (AS REqUIRED)3/8”- 16 hExNUTS (AS REqUIRED)1/4”- 20 fLANGE hExNUTS (AS REqUIRED) 1/4”- 14 x 5/8” SELf TAPPINGSCREWS (AS REqUIRED)(4) 1/4”- 20 hExNUTS(2) 1/4”- 20 x 5/8” TAMPERRESISTANT SCREWS 1/4”- 20 x 7/8” SELf DRILLINGSCREWS (AS REqUIRED) 1/4”- 20 x 11/16” SELf DRILLINGSCREWS (AS REqUIRED)(2) 1/4” x 2- 1/2” CARRIAGE bOLTSPackage contents continued...3/8”- 16 x 1-1/4” hEx hEADbOLTS (AS REqUIRED)TOP SECTIONINTERMEDIATE II SECTION (5 SECTION DOORS ONLY)LOCk SECTIONbOTTOM SECTIONbOTTOM bRACkETWARNING LAbELSASTRAGALWARNING LAbEL(2) 1/4” x 2-3/4” CARRIAGE bOLTSINTERMEDIATE I SECTION5/16”- 18 hEx NUTS(AS REqUIRED)3/8”- 16 x 3/4” hEx hEAD bOLTS(AS REqUIRED)