Wayne Saccadic Fixator Instructions For Using Manual
                                                  | |
22Wayne EngineeringTM, a subsidiary of Eyecarrot Innovations Corp. in Canada, is the leading provider of high-performanceinstruments for testing and enhancing visual and motor skills. Learn more at www.wayneengineering.com and www.eyecarrot.com.16 30 100 269. Sports Screening - Gardner Product With Flash OptionFlash "on-off" lasts for 20 msec. Starting speed of lights is 40 lights/min. Elapsed time preset to30 seconds. For program information, click on "Parameters and Selections"on our websiteMANUALS page.Activity (1) Time (2) Speed (3) Pattern (4) Lights (5) Timeout (6) Flash (7) Dual(0)14 30 40 3 1 0 20 66|70. Sports Reaction/Plus Measurements, Prog. 9-40Button/lights aways appear at the 3 o'clock location to permit the use of external switches suchas foot pads or the IR beam sensor. These must be used with the Interface Control Box.Remember to press and hold button until an auditory beep is heard. For program information,click on "Parameters and Selections" on our website MANUALS page.Activity (1) Time (2) Speed (3) Pattern (4) Lights (5) Timeout (6) Flash (7) Dual(0)13 5 3 1 0 0 66Additional Sports ProgramsRemember that all these programs can be modified to fit your specific needs; i.e. the elapsedtime setting, the speed of the lights, the pattern of the lights, the time-out, and the delay times.Refer to for all the stored parameters in the computer.Instructions For Retrieving These Programs1. Depress the "enter" key.2. Depress the "9" key. A "9" will appear in the leftmost position of the display.3. Enter the number of the selected program (shown before each program's title). The number willbe shown in the right three positions of the display.o If you make a mistake, repeatedly depress the "0" key until the display shows only a "9" inthe leftmost position and a "0" in the rightmost position. Then re-enter the programnumber.4. Depress the "enter" key. The program will now be retrieved.5. Make any desired adjustments to the settings.6. Depress the start/stop reset button to begin running the program.7. ''' For the Sports Vision Trainer, The default (preset) settings, makes the right and left sides active.To select only the right side, follow these instructions: |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine