Wood Stone WS-PX-4343-RFG Installation And Operation Manual

Also see for WS-PX-3030-RFG: Service manual Installation and operation manual

Contents

Questions? Contact your distributor, or contact Wood stone at 360-650-1111 www.woodstone-corp.comOctober 2005. 11Phoenix Installation and Operation Manual3. Using a forklift, carefully lower thebody of the oven on to the stand sothat the bolt holes line up. Whilesupporting the oven with the lift, installthe 3/8" x 1" carriage bolts. Use thewashers provided and tighten all nutssecurely. Be sure to use the forkliftpockets when lifting the body of theoven. Bistro 3030 models - forkliftpockets are on the front only and donot extend all the way through theoven.ASSEMBLY4. After the the oven body is bolted to the stand, the oven can be moved intoplace with a pallet jack using the LOWER forklift pockets. If the oven is to beinstalled against a wall, leave access to the back of the oven until theassembly is completed.CAUTION: The 3030 model Bistro weighs 800 LBS (386kg). The 4343 model Bistro weighs 1700 LBS (771kg).The oven is very top-heavy. IF THE OVEN TIPS ITCAN CAUSE SEVERE INJURY OR DEATH!! The ovenshould only be moved in this manner (pallet jack) on aLEVEL FLOOR. Do not attempt to move the oven with ahand truck. If the oven must be moved over an inclinedsurface, a forklift or other suitable means should beemployed. If the installer does not have the equipmentor experience required to move the oven safely, werecommend you secure the services of a qualifiedrigging company.Make sure the pallet jack wheels do not contact the underside ofthe fork pocket when lifting to avoid damaging the stand.