Wood Stone mt. ChuCkanut Installation And Operation Manual

Also see for MOUNTAIN Series: Service manual Installation and operation manual Installation and operation manual Installation and operation manual

Contents

Wood Stone mt. ChuCkanut Installation And Operation Manual Manual pdf 34 page image

34An ongoing program of product improvement may require us to changespecifications without notice. RFG-W Revised October 2010Wood Stone Corporation1801 W. Bakerview Rd.Bellingham, WA 98226 USAToll Free (800) 988-8103Tel (360) 650-1111Fax (360) 650-1166Info@woodstone-corp.com or visit www.woodstone-corp.comMountain Series Installation and Operation ManualFLame heiGht ControLThrottle knob PointerFlame Height Index ScaleDETERMINING THE aPPROPRIaTE FLaME HEIGHTFor each specific configuration of oven there is a system that determines what the desired flame height will be.each flame height corresponds to a saturated floor temperature. Several factors need to be accounted for in order todetermine this relationship for each oven.UsING THE FLaME HEIGHT INDICaTOR sCaLEHeat Up Flame- Set Throttle knob Pointer at ‘5’ (highest setting) on the Flame Height Index Scale until desiredtemperature is reached.Holding Flame- Set Throttle knob Pointer at ‘3’ (~8-9” flame) on the Flame Height Index Scale for desired temperatureof 570-600° F. Set Throttle knob Pointer at ‘2’ (~5-6” flame) on the Flame Height Index Scale for desiredtemperature of 450-480° F.Cooking Flame- After introducing the pizza/product into the oven, visually raise the flame to approximately 3 incheshigher than the Holding Flame.*NOTE: THE COOKING FLaME Has TWO PURPOsEs:1) To bake the top of the pizza/product as fast as the bottom of the pizza/product.2) To help replace heat to the floor (hearth) that is lost during production cooking.***Return the Throttle knob Pointer to the Holding Flame after removing the pizza/product from the oven.****Note: The settings recommended on the Flame Height Index Scale for specific flames are based on ovens that havebeen installed according to specifications. Individual results may vary slightly.Throttle knobFor More information regarding Flame Height Control go tothe Training section of our web site at:www.woodstone-corp.comFLaME HEIGHT INDICaTORFLAME HEIGHT CONTROL