Woodson W.GPC61SC Installation Operation & Maintenance

Also see for W.GPC61SC: Specification, installation and operation manual

Woodson W.GPC61SC Installation Operation & Maintenance Manual pdf 10 page image

INSTALLATION, OPERATION & MAINTENANCEINSTALLATION, OPERATION & MAINTENANCEINSTALLATION, OPERATION & MAINTENANCEINSTALLATION, OPERATION & MAINTENANCEWoodson Contact Toaster –W.GPC61SCTel: 1300 79 1954 Web: www.stoddart.com.au Email: fse@stoddart.com.auPage 10 of 23Due to continuous product research and development, the information contained herein is subject to change without noticeElectrical ConnectionWARNING!This machine must be installed in accordance with AS/NZS 60335.1Information• The machine is supplied with a plug and lead (10A).• The electrical supply shall comply with the rating plate data.• Ensure that machine is connected to a power point with compatible power rating of 240 volts 10 amps.• The machine must be plugged directly into the power outlet. The use of extension leads or power boards arenot to be used.• The equipment should be earthed according to local electrical codes to prevent the possibility of electricalshock. It requires an earthed receptacle with separate electrical lines, protected by fuses or circuit breaker ofthe proper rating.• If the supply cord is damaged, it MUST be replaced by the manufacturer, its service agent or similarlyqualified persons in order to avoid a hazard. Power cable cannot be stretched kinked, pressed, during normaloperation, service or anytimeWARNING!Some procedures in this manual require the power to the equipment to be turned off andisolated. Turn the power OFF at the power point and unplug the power supply lead by theplug body. If the power point is not readily accessible turn the equipment off at the isolationswitch or the circuit breaker in the switchboard. Attach a yellow “CAUTION-DO NOTOPERATE” tag. This must be performed where relevant unless the procedures specifyotherwise.FAILURE TO DO SO MAY RESULT IN ELECTRIC SHOCK.