www.meenjet.net Toll:4006000205 10Printer Care and MaintenanceYou may fully charge the battery but do not overcharge the battery. Please don’tovercharge it for long time, and do not to use the battery in too cold or too hot condition.Make sure to use and drain off the battery and recharge it at least once a week.Make sure to check if the printer is loaded with ink cartridge and battery. Make sure tocheck if the battery has drained off.Keep touch screen clean. Do not hit touch screen sharply.Keep machine surface and ports clean.Check status bar upon machine startup, make sure status bar is normal and check ifthere’s alarm of error. (In case of alarm of error, check troubleshooting for solution).Depending on properties, some ink cartridge may require to be removed from printerafter use. Turn off the machine after use, and remove the cartridge from printer. Wipethe printhead clean with Non-woven, cap the printhead with the designed cap forprevention of the nozzles from clogging, and store the capped cartridge in safeenvironment with printhead facing up. (Please refer to ink cartridge care andmaintenance for instructions).Note: Standard battery cannot be substituted.