X10 LM15A Installation And Operating Instructions Manual

Also see for LM15A: Installation and operating instructions User manual

X10 LM15A Installation And Operating Instructions Manual Manual pdf 1 page image

Check Out our Web site at:www.x10.comFor more information on X10 products andspecial promotional offers..X10 Wireless Technology, Inc. LIMITED 1-YEAR WARRANTYX10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to befree from defective material and workmanship for a period of one (1) year from the originaldate of purchase at retail. X10 agrees to repair or replace, at it’s sole discretion, a defectiveX10 product if returned to X10 within the warranty period and with proof of purchase.If service is required under this warranty:1. Call 1-800-675-3044 or visit www.x10.com, or e-mail sales@x10.com to obtain aReturn Merchandise Authorization (RMA) number.2. Return the defective unit postage prepaid to X10 (see address on back).3. Enclose a check for $4.00 to cover postage and handling.4. Enclose a dated proof of purchase.5. X10 is not responsible for shipping damage. Units to be returned should be packedcarefully.Please visit www.x10.com/warrantyto complete your on-line warranty registration. Thank you.For help or more information on setup, please visit: www.x10.com/supportSocket Rocket, Screw-In Lamp Module, Model LM15AINSTALLATION AND OPERATING INSTRUCTIONSUnlike conventional X10 Modules the LM15A does not have any code wheels. You set itscode up from an X10 controller and it then remembers this code, even after a poweroutage. Because the LM15A remembers its code, you can set it up in any lamp and thenmove it to its final location (in an outdoor light fixture, for example). Default code is A1.1. Unscrew your light bulb from its socket and screw the LM15A into the light socket.2. Screw an incandescent light bulb (up to 150W) into the LM15A. Do NOT use withfluorescent lamps! Turn the lamp switch ON.3. Set any X10 controller to the House Code you want the LM15A to respond to.A. To set the Unit Code and House Code from an MC460 Mini Controller, MT522/MT10A Mini Timer, or RT504/HR12A wireless remote:Plug the controller into the same outlet as the lamp (you can move it later). Then,(within 30 seconds of applying power) press the ON button (corresponding to the UnitCode you want the LM15A to respond to) on the X10 controller, 3 times, at about 1second intervals. On the third press the lamp turns on signifying that the code has beenlearned. Write your House Code and Unit Code in the box on the LM15A's label.B. To set the code from an SC503 Maxi Controller:Press the number button only, 3 times (within 30 seconds of applying power). On thethird press the lamp turns on signifying that the code has been learned.The LM15A will now remember this House Code and Unit Code and respond to it fromnow on (even after a power outage).To change the code that the LM15A responds to, turn off the power to it, turn it back on,and then repeat step A or B (within 30 seconds of applying power).Note 1. You must leave the lamp switch or wall switch on at all times otherwise theLM15A will have no AC power and you won't be able to control it remotely.Note 2. The LM15A does not have local control (you cannot turn the light on from itsregular switch). If you want this feature, use the LM465 Lamp Module for plug-in lamps, or the WS467 Wall Switch Module for light fixtures.Note 3. The LM15A does not respond to bright and dim commands. It does respond tothe All Lights On and All Units Off commands.Note 4. The LM15A can be used indoors or outdoors.Note 5. The LM15A is a one-way device. For two-way applications use the LM14A.LM15A-10/01

/ 1

Related manuals for X10 LM15A