XD enjoy XD32HDV Operating Instructions Manual
ENG - Instruction Manual - 24 -TV Menu Features and FunctionsPicture Menu ContentsMode You can change the picture mode to suit your preference or requirements. Picturemode can be set to one of these options: Cinema, Game, Dynamic and Natural.Contrast Sets the lightness and darkness values of the screen.Brightness Sets the brightness value for the screen.Sharpness Sets the sharpness value for the objects displayed on the screen.Colour Sets the colour value, adjusting the colors.Power Save Mode To set the Power Save Mode as Eco, Picture Off and Disabled.(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)Backlight(Optional)This setting controls the backlight level. The backlight function will be inactive ifthe Power Save Mode is set to Eco. The backlight cannot be activated in VGA, MediaBrowser mode or while the picture mode is set to Game.Noise Reduction If the broadcast signal is weak and the picture is noisy, use the Noise Reductionsetting to reduce the amount of noise.Advanced SettingsDynamic Contrast You can change the Dynamic Contrast ratio to desired value.Colour Temp Sets the desired colour tone.Picture ZoomSets the desired picture size from picture zoom menu.Note: Auto (Only available in Scart mode with SCART PIN8 high voltage/low voltageswitching)HDMI TrueBlack(optional)While watching from HDMI source, this feature will be visible in the Picture Settingsmenu. You can use this feature to enhance blackness in the pictureFilm ModeFilms are recorded at a different number of frames per second to normal televisionprogrammes. Turn this feature on when you are watching films to see the fastmotion scenes clearly.Skin Tone Skin tone can be changed between -5 and 5.Colour Shift Adjust the desired colour tone.RGB Gain You can configure the colour temperature values using the RGB Gain feature.Reset Resets the picture settings to factory default settings.(Except Game Mode)Autoposition (inPC mode) Automatically optimizes the display. Press OK to optimize.H Position (in PCmode)This item shifts the image horizontally to the right hand side or left hand side of thescreen.V Position (in PCmode) This item shifts the image vertically towards the top or bottom of the screen.Dot Clock (in PCmode)Dot Clock adjustments correct the interference that appear as vertical banding in dotintensive presentations like spreadsheets or paragraphs or text in smaller fonts.Phase (in PCmode)Depending on the resolution and scan frequency that you input to the TV set, youmay see a hazy or noisy picture on the screen. In such a case you can use this item toget a clear picture by trial and error method.While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to thePicture Settings while in PC mode. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine