XLT Ovens XLT Installation & Operation Manual

XLT Ovens XLT Installation & Operation Manual Manual pdf 6 page image

6 Oven Description1832B-W2440B-W3240B-W3255B-W3270B-W3270SB-W3855B-W3870B-WFood product is placed on the stainless steel wire conveyor belt on one side of the oven.The conveyor then transports the food through the bake chamber at a user-controlled speed. Thisprovides repeatable and uniform food cooking. The conveyors can be easily configured to moveeither left-to-right or right-to-left. A large center sandwich door allows the introduction or re-moval of food items for cooking at shorter times. Temperatures up to 550º F or 288º C inside theoven are achieved by means of a user-adjustable digital control.The first 2 digits of the model number represent the conveyor width and the last two digitsindicate the bake chamber length. The ovens may be used in a single, double, or triple oven stackconfiguration. A single or double configuration can be upgraded by adding additional decks up tothe maximum of three. All ovens are gas-fired and are available in Natural gas or LP gas models(Electric ovens are also available). The 3270 and 3870 models have two burners, one on each side,and have two control boxes. All other models have only a single burner with a single control boxthat can be supplied on either end. All models can be configured for a split belt conveyor.“-AE” indicates Australian Export configuration, certified to AGA AS 4563.“-S” indicates Standard configuration, certified to ANSI Z83.11/CSA 1.8 & ANSI/NSF 4.“-W” indicates World configuration, certified to CE GAD 90/396/EEC & BS EN 203-1.This manual covers the following XLT Series Ovens and AVI Hood models:1832-AE-B2440-AE-B3240-AE-B3255-AE-B3270-AE-B3270S-AE-B3855-AE-B3870-AE-B1832B-S2440B-S3240B-S3255B-S3270B-S3270SB-S3855B-S3870B-SAVI-1832A-S AVI-1832A-WAVI-2440A-S AVI-2440A-WAVI-3240A-S AVI-3240A-WAVI-3255A-S AVI-3255A-WAVI-3270A-S AVI-3270A-WAVI-3855A-S AVI-3855A-WAVI-3870A-S AVI-3870A-WXLT Ovens are certified to the following Standards:AVI Hoods are certified to the following Standards:“-S” indicates Standard configuration, certified to UL 710, ULC-S646, NFPA 96, and ANSI/NSF 2.“-W” indicates World configuration, certified to UL 710, ULC-S646, NFPA 96, and ANSI/NSF 2.