JumpPressing on the remote causes the radio torevert to the last channel selected immediatelyprior to the current selection. A second press ofreturns you to the original channel playedprior to initiating the jump process. With thisfeature, you can cycle back and forth betweentwo channels.ScanYou can scan through channels in one of thefollowing ways:Scan presetsWhen in the PRESET mode (in preset bank A, B orC), pressing scrolls you through the presetchannels in the active bank only. The unit scanschannels beginning with the next preset higher innumber than the current preset.Scan CategoryWhen in the CATEGORY SEARCH mode, pressingscrolls you through the channels in thecurrent category only, beginning with the nexthigher channel than the current channel.Scan AllWhen in DIRECT mode, pressing scrolls youthrough all channels, beginning with the nexthigher channel than the current preset.Each channel scanned will play audio for 5 secondsafter which the radio tunes to the next channel inthe scanning order. To lock onto a particularchannel, press or within 5 seconds.Locking onto a channel automatically exits youfrom the scan mode. You can also exit the scanmode without making a selection by pressing anyof the following , or .XMCommander returns to the mode in which itoperated prior to entering scan mode.s e c t i o n 48Special FeaturesTuneSelect™ — New Feature!TuneSelect is a new XM feature which allows youto “tag” up to 15 songs you like and have your XMRadio alert you when any of those songs is playingon a different channel.Activating TuneSelectTo activate TuneSelect, press and hold the ENTERbutton at anytime during the playing of aparticular song. When TuneSelect is activated, youwill hear a beep and Song Selected will bedisplayed on the screen for 2 seconds and then theunit will revert to the previous screen information.When one of your designated songs begins playingon any other channel, your unit will beep andSONG FOUND and the channel number and songname will display on the screen. To go to thatsong, simply press the ENTER button. If noaction is taken within 8 seconds, your unit willrevert to the previous screen information of thecurrently selected channel and TuneSelect will bede-activated for that song only until the unit ispowered off and powered on for the next listeningsession.Managing TuneSelect SongsTo erase some or all of the songs identified inmemory with TuneSelect, press the DISP/MENUbutton and using the tuning wheel, scroll tothe TuneSelect option. Press ENTER to select.You will have the option to erase all songs or onlyselected songs. TuneSelect can accommodate upto 15 selections. Once 15 songs are selected,adding new songs will automatically replace theoldest song in the list.