XOVision X450NAV Operation Manual
                        | |
43Before You Start01610IPODRepeat PlayingDuring playback, pressPress it again tocancel this function.RPT to trackrepeat, disc repeat, off.* This function is operated by using the remotecontrol only.15Note:Playing Tracks at RandomDuring IPOD playback, whenRDM button, Shuffle off,pressingShuffle Track,Shuffle Album will be activated.16Note:* This function is operated by using the remotecontrol only.IPOD playDuring IPOD playback, connect the IPODwire (5V) to the one on the backside of themain unit. The unit will play the track inIPOD.If an IPOD is loaded, you can go backto the source status, press IPOD to enter intoIPOD setup:Pause PlaybackDuring IPOD mode, press button topause the playback, Press it again to returnto normal playback.Pressing in the monitor also performsthe same function.Note:*2712345678910MENU Press it to return to the previousmenu. Press and hold it to back to rootif first connection.Play/ pauseBriefly press to play previous track,press and hold to fast forward.Briefly press to play next track,press and hold to fast reverse.AUDIO setup menuTo adjust AUDIO please refer to pages 19.Press this button to mute.You can adjust the volume bygliding this strip horizontally.Press this button to lock or unlockthe touch screenDuring unlock status, glide up and down orleft and right on the blank space of screento switch to the previous or next mode.Press this button to go back to theselect menu.Current playing informationCurrent file directory list boxSelecting Tracks Fast* Pressing / in the monitor to performthe same functionNote:During IPOD playback, press to playprevious track ,press to play next track .2121110/13305 10KHz06 20KHz07 mute08 1KHz L09 10KHz L124 5 6 791038Replacing the FuseMake sure the amperage matches thespecified value when replacing the fu-ses. If the fuse is blown, check the po-wer connection and replace with a n-ew one. If the same problem occurs,it would be subjected to the malfun-ction. In such cases, please consultto the nearest service dealer.When the range of the operation of t-he card remote control becomes shortor doesn't function while operating.Replace the lithium battery with a newbutton cell (CR2025). Make sure thebattery polarity is correct beforereplacing.Precautions on Using LithiumBatteryGently pull out the Battery Holder whilepressing the Stopper.Put the button-type battery with mark(+)upward into the Battery Holder.Replacing the BatteryInsert the Battery Holder into the RemoteControl.!MaintenanceWarningNever use the fuse with the ratedamperage more than that supplied toyour unit, otherwise it will damage theunit.Warning!Improper handling of the battery maylead to explosion.It cannot be charged , disassembled orthrown into a fire.!Always keep the lithium battery beyondchildren s reach. If swallowed, see adoctor immediately.Clean the battery with a dry cloth,to ensure it is perfectly connected.Make sure the polarity is correct whenloading with the battery.To prevent short circuit, do not usemetal tweezer to clip the battery. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine