XTS DVR72XX-S User Manual

Contents

XTS DVR72XX-S User Manual Manual pdf 43 page image

434.6.1 Go to alarm setup interfaceIn the main menu, from Setting to Alarm, you can see alarm setup interface. See X 3 1 3 H 3 1 3 H 3 1 3 H 3 1 7 H Figure 4-23X .4.6.2 Alarm setupAlarm interface is shown as below. See X 3 1 4 H 3 1 4 H 3 1 4 H 3 1 8 H Figure 4-23X .z Alarm in: Here is for you to select channel number.z Event type: There are two types. One is local input and the other is network input.z Type: normal open or normal close.z PTZ activation: Here you can set PTZ movement when alarm occurs. Such as go to preset,tour& pattern when there is an alarm. Click “select” button, you can see an interface isshown as in X 3 1 5 H 3 1 5 H 3 1 5 H 3 1 9 H Figure 4-27X .z Period: Click set button, you can see an interface is shown as in X 3 1 6 H 3 1 6 H 3 1 6 H 3 2 0 H Figure 4-25X . Here you canset for business day and non-business day. In X 3 1 7 H 3 1 7 H 3 1 7 H 3 2 1 H Figure 4-28X , click set button, you can see aninterface is shown as in X 3 1 8 H 3 1 8 H 3 1 8 H 3 2 2 H Figure 4-29X . Here you can set your own setup for business day andnon-business day.z Anti-dither: Here you can set anti-dither time.z Show message: System can pop up a message to alarm you in the local host screen if youenabled this function.z Alarm upload: System can upload the alarm signal to the network (including alarm centre)if you enabled current function.z Send email: System can send out email to alert you when alarm occurs.z Record channel: you can select proper channel to record alarm video (Multiple choices). Atthe same time you need to set alarm record in schedule interface (Main Menu->Setting->Schedule) and select schedule record in manual record interface (Main Menu->Advance->Manual Record).z Latch: Here is for you to set proper delay duration. Value ranges from 10 to 300 seconds.System automatically delays specified seconds in turning off alarm and activated output afterexternal alarm cancelled.z Tour: Here you can enable tour function when alarm occurs. It is a one-window tour: Pleasego to chapter 5.3.9 Display for tour interval setup.For snapshot operation, please refer to chapter 4.4.2.Please highlight icon to select the corresponding function. After setting all the setupsplease click save button, system goes back to the previous menu.