XVision EVD16NCF User Manual
                                                 | |
Contents
| 
6.2 RECORD MODE1. Live monitoring is operable during recording.2. When the hard disk information icon turns to red, the device is notifying theuser to replace a new hard disk.3. Manual Record: Under monitoring mode, press “REC” button to enable all camerarecordings, and “STOP” button to stop manual recording.4. When schedule recording (ALARM/ MOTION DETECTION/ CONTINUERECORD) has been activated. Recording can not be stopped by pressing“STOP” button, it is ineffective during schedule record time.5. When the main password or the playback password is switched off, or thepassword has been copied onto the CF card, and the CF card has been inserted.Press PLAY or SEARCH button, system auto enters the playback or searchmode, and the will not request a password to be entered.6. When the main password is switched off, or the password has been copied ontothe CF card, and the CF card has been inserted. Press MENU button, systemauto enters main menu, and will not request a password to be entered.7. After entering playback mode or menu setup, when correct password has beenentered, all recording activities will stop. When exiting playback mode or menusetup, once the schedule recording has been switched on, schedule recordingwill auto start-up.8. Power-on after power-loss, the system auto returns to the recording mode beforepower-loss.12 |
Related manuals for XVision EVD16NCF
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine