|
User’s Manual334.6.2 Dome Protocol SetupThe Dome Protocol item lists the available dome protocols for communicatingwith dome cameras connected to the X4/X8/X16 DVR. From the Main menu,select and press ENTER. The following menu is displayed.Camera Setup1. Camera Select2. Dome Protocol3. Dome ID4. Camera Title5. Covert6. Termination7. Brightness8. Contrast9. Saturation10. HueCH1None0NONO0000To configure dome protocol, select a camera first and set the communicationsprotocol associated with dome camera using the Direction keys and ENTER.The available protocol includes , D>, P>,, and (default).NOTE: The settings become effective after saving the changes andexiting from the menu.4.6.3 RS485 SetupX4/X8/X16 DVR controls the domes via RS-485 communication protocol. TheRS-485 parameters in X4/X8/X16 DVR must be set to the same parametersas the protocol for RS-422 setup of the dome.Users are allowed to change the RS-485 settings of the X4/X8/X16 DVR.Select in Main menu, then select from theSystem Setup menu and press ENTER. The following menu is displayed.RS485 Setup1 Unit ID2 Baud Rate3 Bits4 Stop5 Parity224960081None
|
