XVision X8D1H User Manual
                                    | |
Contents
| 
23X8D1H – User Manual1-9 UTILITY SETUPItem DescriptionHDD InitializationSelect to enter hard disk initialization (i.e. format) menu butplease ensure the DVR has stopped recording. On entering themenu select the hard drive to be formatted and then press ‘Start’.Once the HDD has formatted successfully the DVR will displaythe text ‘Succeed’.Reset System Events Reset all the recording events in DVR.Copy System Events toDeviceThis allows the user to copy any events recorded on the DVR toa USB or similar device. The file will be saved as ‘log.csv’System Recovery Restore the DVR to the original factory settingsCopy Setup to DeviceThis allows the user to copy the DVR configuration (i.e.Record/Display/Motion settings etc.) to a USB device. The filewill be saved as ‘sdvr_conf.dat’ on your USB memory stick.Download Setup fromDeviceSelect to download a saved configuration from a USB device andapply to the DVR.UpgradeAllows the user to upgrade the DVR firmware via a USB device.Please ensure that the DVR is not recording before applying thenew firmware update. Please note that the System will rebootautomatically once the upgrade is completed.Please Note: Do not turn off the power to the DVR or remove the USB device whilstupgrading as it may cause an incomplete firmware upgrade and may damage the DVR. |
Related manuals for XVision X8D1H
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine