XVision XH4DVRDVD Setup Manual

00P5L5080YXEA2 1Xvision XH4/8/16DVRDVDSetup GuidePackage ContentsInspect the packing carton and make sure the Xvision XH4/8/16DVRDVD is complete. Remove allitems from the box and make sure it contains the following items.Xvision XH4/8/16DVRDVD PowerAdaptorPowerLeadUser’sManualFunction Keys on the Front Panel1 Channels1. In Live and Playback modes, press any key to view thecorresponding video in full-screen.2. In the input interface, keys 1-10 can be used for direct input ofnumbers 0-9.3. In Dome Camera Control mode, Press 1 to enter the Set/Go presetmenu; 2 to hide or display the dome setting parameters; 11-16 is forquick access of preset points 1-6.2 MODE Press this key to view either full-screen or multi screen modes.3 PLAY/STOP Press once to start the playback of recorded video. Press again to exit.4 FREEZE Press this key to freeze the current viewing screen.5 SEQ Press this key to start automatic sequence display of cameras.6 SEARCH Press this key to search recorded video by date/time or event.7 MENU Press this key to enter the OSD setup menu.8 COPY This key is used for selecting recordings in the Xvision ezBurn™function.9 Direction Keys1. In Zoom mode, these keys function as direction keys.2. In the OSD setup menu, the direction keys are used to move thecursor to previous or next fields. To change the value in the selectedfield, press the UP / DOWN keys.10 DOME Press this key to enter the Dome Camera Control mode.11 CALL Press this key to enter the Call Monitor Control mode. (8&16 Channelmodels only)12 ENTER/ZOOM1. In the OSD menu or selection interface, press these keys to makethe selection or save the settings.2. In live full screen viewing mode, press this key to view a 2x zoomimage; press it again to return to live viewing.13 ESC Press this key to cancel or exit from various control modes.