XVision XIP3101 Advanced Installation Manual

Also see for XIP3101: Quick installation guide

- 40 -Event Configuration >> Motion Detect TriggerSelect the Enable option to enable the trigger function of the camera, sothat you can send captured images within the detecting area to the FTPserver, email receiver, Network Storage server, or the connected USBdevice. You have to configure corresponding settings, such as FTP serverand email server, to enable this feature.- Schedule Profile: Select a schedule profile from the pull-down list.- Action: Select the destination that the captured images will besent to: Send Email, FTP Upload, Record to Network Storage, orSave Image to USB.Event Configuration >> Schedule TriggerYou can separately configure the schedule for trigger function of thecamera by Email, FTP, or Network Storage. Select the Enable option oneach item, and then select a Schedule Profile from the pull-down list andset the Interval time.NOTE If the setting value of the Network Storage Recording Time PerEvent option in General Setting is longer than the Interval time inNetwork Storage Schedule, the recorded file will be a continuousvideo clip.For example, if you set the Network Storage Recording Time PerEvent as 10 seconds and the Interval as 5 seconds, recorded filebecomes a non-stop video clip because the camera will record a10-second video clip every 5 seconds.