Xante FilmMaker 4 Maintenance And Specifications

Contents

Xante FilmMaker 4 Maintenance And Specifications Manual pdf 6 page image

6-6 Maintenance and SpecificationsThe fuser becomes very hot during operation. Always allow the fuser to coolcompletely before opening the fuser cover. If a paper jam occurs in the fuser area, turnoff the printer and wait at least 30 minutes before attempting to clear the jam.2. Remove any paper scraps and wipe off paper and toner dust with a dry cleancloth (fig. 6.3).Fig. 6.3 Toner and Manual Feed Area Cleaning3. Reassemble the printer and reconnect it to the power source.Exterior Cleaning1. Turn off your printer and disconnect it from the power source.Use only water or mild detergent for cleaning. To prevent discoloration, cracking, anddeformation of the case, do not use alcohol, ammonia-based cleaners, or other volatilecleaners on or around the printer. Never spray or pour solutions directly on theprinter. Always put the solution on the cloth and wipe the printer with the cloth.2. Clean the printer’s exterior using a clean, lint-free cloth dampened with water(fig. 6.4).Scale 75%Fig. 6.4 Exterior Cleaning