Xante FilmMaker 4 Quick Reference Manual

Xante FilmMaker 4 Quick Reference Manual Manual pdf 22 page image

22Installation-Windows NT/2000/XP (continued)Note: Be sure to close the Propertieswindow to apply the new settings.Configuring IP, SubNet, and GatewayAddresses1. From the ps_files folder on the XANTÉCD-ROM, copy dhcpoff.ps to your c:\drive.2. Go to DOS (Command) Prompt.3. Type copy dhcpoff.ps to lpt1.4. Power cycle the printer (turn off, thenback on).5. Using a word processing application,open setipsub.ps file from the ps_filesfolder. Edit the file so it contains the IP,Subnet, and Gateway address youobtained from your network administra-tor. Save the file to your c:\ drive.6. Go to DOS (Command) Prompt.7. Type copy setipsub.ps to lpt1.8. Power cycle the printer again and verifythat the start-up page contains your IP,Subnet, and Gateway addresses.9. Go to DOS (Command) Prompt to pingthe printer.c:\ping (IP Address)Note: If you can ping the printer, go on tostep 10. If you cannot ping yourprinter, contact your NetworkAdministrator.10. Go to your Printer Properties (fig. 96)and select the Port Tab (fig. 97).Fig. 96 Printer Properties Window.Fig. 97 Select Ports Tab.11. Select Add Port from the Ports Tab.12. Highlight Standard TCP/IP Port; then,click New Port (fig. 98).