Installation2–4 975-0209-01-01Wiring the Inverter/ChargerFor a successful installation, you need to plan the AC and DC wiring, as well asthe remote control and generator connections. These connections are described inthis section and illustrated in Figure 2-1.AC components include:• Sources of AC input• AC wiring• Over-current protection and disconnect devices• AC distribution panelsDC components include:• Sources of DC power (batteries, for example)• DC cables• DC over-current protection and disconnect devices• DC load centerWARNING: Fire, shock, and energy hazardsMake sure all AC and DC wiring being connected to the RS is disconnected (physically orby opening the breaker) from all electrical sources before handling. All wiring must bedone in accordance with local and national electrical wiring codes. Xantrex recommendsall wiring be done by a qualified installer or electrician.
