Xerox 2135DX - Phaser Color Laser Printer Service Manual

Also see for 2135DX - Phaser Color Laser Printer: Brochure

Contents

Xerox 2135DX - Phaser Color Laser Printer Service Manual Manual pdf 160 page image

Service Guide 147LED assemblyWarning Switch off the power and disconnect the power cord.1. Open the top cover. Remove the drum/toner cartridges. Place them ina lightproof black bag to protect the drum units from light and store in asafe place.2. Carefully disconnect the flat data harnesses from the LED assembly byinserting a small, flat-blade screwdriver through the hole in the end ofthe LED assembly and lifting up on the connector. Free the harnessesfrom the LED assembly.3. Disconnect the LED assembly’s power harness from the toner sensorboard.4. Push the LED assembly against its springs and rotate the LED assemblyuntil its locking tabs align with the slots in the frame.5. Starting with the front end of the LED assembly, carefully spread themounting frame outward slightly to free the LED assembly.6. Remove the LED assembly.Reverse these steps to install the LED assembly.Removing an LED assemblyDisconnectFlat Data HarnessLED AssemblySpringSpringTop Cover0725-52