Xerox Phaser 3635 System Administration Guide 9710 Embedded FaxThis chapter explains how to set up the Embedded Fax feature of the machine.These are the procedures to follow to install and setup this service:1. Overview on page 972. Information Checklist on page 973. Enable Embedded Fax from the Machine on page 984. Test the Embedded Fax on page 985. Additional Features on page 98OverviewEmbedded Fax enables Users to send hard copy documents to another fax machine (ormultiple fax machines) via a dedicated phone line connection. The Embedded Fax featureis installed using the Fax Installation Wizard with step by step instructions to lead youthrough the configuration.Server Fax and Embedded FaxThe Embedded Fax and Server Fax services are mutually exclusive and only one of them canbe enabled at any time.If Server Fax is currently enabled and Embedded Fax is then enabled, Server Fax will bedisabled automatically.If Embedded Fax is currently enabled and Server Fax is then enabled, Embedded Fax will bedisabled automatically.Information ChecklistBefore starting the Installation procedure, please ensure that the following items areavailable and/or the tasks have been performed:1. Ensure that the machine is fully functioning in its existing configuration.2. Ensure that the machine has access to a telephone connection.3. Obtain the telephone number that you will configure as the machine's fax number.4. Verify the Embedded Fax feature installed on your machine.5. Connect your telephone cable(s) to the fax port(s) on the machine.
