DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENTXEROX DOCUPRINT 4850/4890 IPS INSTALLATION PLANNING GUIDE E-115. Configure TCP/IP for MVS for the printerThe TCP/IP Profile dataset contains statements that define theparameters used by TCP/IP for MVS address space. The followingparameters have special consideration for PSF and the TCP/IP-attached IPS printers.Note: It is not necessary to define the printer in TCP/IP forMVS, because the IPS acts as a conduit from the MVS systemto the LAN. However, some settings in the TCP/IP Profiledataset may need to be altered, depending on your currentsettings.Table E-6. PSF/MVS PRINTDEV statement example//PRT277 CNTL//PRT277 PRINTDEV FONTDD=*.FONT01, /* FONT LIBRARY DD */// OVLYDD=*.OLAY01, /* OVERLAY LIBRARY DD */// IPADDR=’13.240.160.97’, /* PRINTER IP ADDRESS */// PORTNO=5005 /* PORT NUMBER */// PSEGDD=*.PSEG01, /* SEGMENT LIBRARY DD */// PDEFDD=*.PDEF01, /* PAGEDEF LIBRARY DD */// FDEFDD=*.FDEF01, /* FORMDEF LIBRARY DD */// JOBHDR=*.JOBHDR, /* JOB HEADER SEPARATOR OUTPUT */// JOBTRLR=*.JOBTLR, /* JOB TRAILER SEPARATOR OUTPUT */// DSHDR=*.DSHDR, /* DATA SET HEADER SEPARATOR */// MESSAGE=*.MSGDS, /* MESSAGE DATA SET OUTPUT */// BUFNO=29, /* NUMBER OF WRITE DATA BUFFERS */// PAGEDEF=X06483, /* DEVICE PAGEDEF DEFAULT */// FORMDEF=A10111, /* DEVICE FORMDEF DEFAULT @H3C*/// CHARS=(GT15, /* DEVICE */// GT12,GT18,GT24), /* DEFAULT FONT SET @H3C*/// PIMSG= (YES,999), /* ACCUMULATE DATA SET MESSAGES */// DATACK=BLOCK, /* BLOCK DATA CHECKS */// TRACE=NO /* BUILD INTERNAL TRACE @H3C*/// PRT277 ENDCNTL
