Xerox 490 Color Management Manual

Also see for Document Centre 480: Reference guide User guide

Contents

Xerox 490 Color Management Manual Manual pdf 92 page image

Color Calibration Using ColorPort Utility Software Xerox 490/980 CCF Printing System6-2 Color Management GuideColor CalibrationBefore performing color calibration, set the cutter to A3 and ensure that all color settings forboth printers are set at 4 (C,M,Y,K).1. Select the CMS Option Tool icon from the PC-GUI.2. Select the [Print Colorimetric Pattern] tab.3. Select the colorimetric pattern to print from the pull-down menu. For Calibration, select(Eye-One iSis).4. Select [Print].5. Select [Yes] to continue. After printing is complete, select one sample of the following testpatterns and cut around the dotted lines neatly:Test Pattern NamesFor Upstream Halftone DotEyeOneiSis_up_Calib.rnd_1 (299)EyeOneiSis_up_Calib.rnd_2 (299)EyeOneiSis_up_Calib.rnd_3 (299)For Downstream Halftone DotEyeOneiSis_dn_Calib.rnd_1 (299)EyeOneiSis_dn_Calib.rnd_2 (299)EyeOneiSis_dn_Calib.rnd_3 (299)For Upstream Error DiffusionEyeOneiSis_up_Calib.rnd_1 (299)EyeOneiSis_up_Calib.rnd_2 (299)EyeOneiSis_up_Calib.rnd_3 (299)For Downstream Error DiffusionEyeOneiSis_dn_Calib.rnd_1 (299)EyeOneiSis_dn_Calib.rnd_2 (299)EyeOneiSis_dn_Calib.rnd_3 (299)