Getting Started3-8 WorkCentre Pro 555, 575Setting the Dial Mode*Your machine must be set to the dialing mode compatible with yourtelephone line requirements. The Dial Modes supported are tone andpulse. Pulse is sometimes referred to as rotary dial.If your machine is connected to a PBX system, you may need to entera number to access the outside telephone line.To set the Dial Mode:1. Press:2.Select the Dial Mode.To select tone, press .To select pulse, press .3.Enter the number required to access an outside line, then pressEnter. (If no number is required, pressEnter.)The menu selection screen redisplays. PressExit orStop toreturn to the Standby Mode.* This feature is not allowed in all markets.Menu2.PulseDial mode1.ToneCall number (10 max)[_ ]
