Perform Printer FunctionsDT6180 HandyBook 15110. Enable and Bring On-line an External FinisherNOTE: Examples of external Finishers include the Signature Booklet Maker (SBM),Signature Booklet Maker II (SBMII), Borg, High Capacity Stacker (HCS), andDocument Booklet Systems (DBS). Before you begin, make sure you are logged onas System Administrator.Click here if you are using DocuSP version 2.x or below.If you are using DocuSP version 3.X:1. In the DocuSP Print Services window, or the DocuSP for DocuTech 2000Series 61xx window, select [Printer Manager]. The Printer Manager windowwill be displayed.2. Select the [Finishing] tab. The Finishing tab will be displayed. In the ExternalFinishers section a list will be displayed with all your external Finishers.NOTE: Only one external Finisher can be active at a time. The Finisher youwant to use must have the word 'enabled' in the Status column and show'On-line' in the On-line column.3. If there are no Finishers enabled and on-line, continue with steps 4 and 5. Ifthere is a Finisher enabled and on-line that you do not wish to use and youneed to enable and on-line a different Finisher, perform steps 6-9.4. Right-click on the Finisher you want to use, then select [On-line] from thedrop-down menu. The word 'on-line' will be displayed in the On-line column.5. Right-click on the Finisher you want to use, then select [Enable] from thedrop-down menu. The word 'enabled' will be displayed in the Status column.6. Right-click on the Finisher that you do not want to use, then select [Disable]from the drop-down menu. The word 'disabled' will be displayed in the Statuscolumn.7. Right-click on the Finisher that you do not want to use, then select [Off-line]from the drop-down menu. The word 'off-line' will be displayed in the On-linecolumn.8. Right-click on the Finisher you want to use, then select [On-line]. The word'on-line' will be displayed in the On-line column.9. Right-click on the Finisher you want to use, then select [Enable]. The word'enable' will be displayed in the Status column.If you are using DocuSP software version 2.X:1. In the DocuSP Print Services window, or the DocuSP for DocuTech 2000Series 61xx window, select [Printer Manager]. The Printer Manager windowwill be displayed.2. Click on [Options], then select [Finishing] from the menu. The Finishingscreen will be displayed.3. Select the [On-Line Finishers] tab. The screen will display a list of all your
