Phaser® 6200 Color Laser PrinterCopyright © 2002 Xerox Corporation. All Rights Reserved. 2TraysThis section covers: Loading paper in Trays 1-3 — see page 2. Loading paper in the Multi-Purpose Tray — see page 6. Using custom size paper — see page 8.For a list of the acceptable papers, transparencies, envelopes, and labels that can be used in each tray,refer to the Supported Papers section of the Trays and Paper Guide on the Interactive DocumentationCD-ROM.NoteDo not load a tray that is currently being used for printing.You MUST set the paper type in the printer’s front panel any time you add paper to the printer. If youchange paper types, take a moment to ensure that the front panel values agree with the paper you haveloaded. If you fail to do this, you can damage the printer’s fuser.Loading paper in Trays 1-3CautionPhaser® 6200 Transparency film is designed specifically to work with this printer's oil-lessfuser. Using non-Phaser 6200 Transparencies might result in poor image quality and mightdamage the fuser. Damage caused by using non-Phaser 6200 Transparencies is not coveredunder the warranty, service agreement, or Total Satisfaction Guarantee. To orderPhaser® 6200 Transparencies, visit the Phaser® 6200 Supplies and Accessories web site.DO NOT load Phaser® 6200 Transparency Film in Trays 2 or 3; use Tray 1 or theMulti-Purpose Tray instead.CautionDO NOT load card stock, glossy coated paper, photo paper, envelopes, labels, businesscards, greeting cards, CD/DVD labels, and CD/DVD inserts in Trays 1-3; use theMulti-Purpose Tray instead.To load paper in Trays 1-3:Instructional videos for loading trays are available on the Interactive DocumentationCD-ROM or the Xerox web site at: www.xerox.com/officeprinting/6200support/You can also refer to the labels inside the printer for paper loading instructions.NoteIf you change the type of paper, you MUSTspecify the type on the front panel of the printer.OK6200-46