Problem SolvingXerox 6204 Wide Format SolutionUser Guide7-4Problems during PrintingThe following will help solve problems which may occur during printing.Symptoms Check RemedyUnable to print. Is the machine’s circuit breakeror power switch off?Turn on the circuit breaker (main power switch)and the power switch.Refer to the section on Powering the SystemOn/Off.Is the printer [Offline]? Press the button and confirmthat the printer is online. If the status is [Offline],select [Online] on the [Print Status] screen.Is the network cabledisconnected?Connect the network cable.Did a machine fault occur? Check the error message, and follow theinstructions to solve the problem.Are the Network Settingscorrect?Correctly set up the Network Settings.Unable to printusing the manualfeed tray (Bypass).Is the specified size medialoaded correctly?Load the correct size media according to themessage that appears, and then print again.Refer to the section on Using the Manual Feed Tray(Bypass).Media often jamsor is wrinkled.Is the correct type of mediabeing used?Load a correct type of media.Refer to the section on Medial Type.Is the media loaded correctly? Load the media correctly.Refer to the section on Loading Media.Is the media tray set correctly? Firmly push in the media tray until it stops.Refer to the section on Loading Media.Is the media damp? Replace with new media.Refer to the section on Loading Media.Do the media size series and themedia type settings match themedia loaded in the machine?Select the media size series and the media typethat match the media that is loaded in themachine.Refer to the section on Media Settings.Are there torn pieces of media orforeign objects inside themachine?Open the front doors and slide out the mediadrawer(s) to remove the torn media or foreignobjects.Refer to the sections on Paper Jams and LoadingMedial.Downloaded From ManualsPrinter.com Manuals
