Xerox 721 Operator's Manual

Also see for 721: User guide Operator's manual Setup guide User guide Release note

Contents

Xerox 721 Operator's Manual Manual pdf 49 page image

PROBLEM SOLVINGXEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL 41Clearing Media Jam (J-11 & J-12)When a jam J-11 occurs, the media jams on the Inner TransportAssembly.When a jam J-12 occurs, the media jams underneath the Drum.1. Open the Right Side Door and turn the Inner TransportAssembly handle to release the transport. Lower and lock thetransport by engaging the Down Lock.2. If the media is not cut and the leading edge of the media hasreached the Drum or beyond the Drum, rotate the Cutterhandle to cut the media. Continue rotating the cutter handleso that the green home position indicator appears in the cutout.3. Open the Manual Bypass Shelf, Drawer 1 and Drawer 2 inorder to clear the jammed media.4. If the leading edge of the media has reached the Fuser Unit,open the Exit Cover and remove the jammed media by rotatingthe Fuser Handle.5. Release the Down Lock while holding the handle of InnerTransport Assembly and lift it up gently until it stops. Thentwist the handle to the left to move the transport to the homeposition. Finally, turn the handle to the right to lock thetransport.6. Rewind the jammed roll until the lead edge of the mediacomes free of the feed rollers.FuserHandleCutterhandleInner Transport handleDown LockMFD1D2D3 D4PFExitCopy Density Menu Enter OnlineMFD1D2D3 D4PFExitCopy Density Menu Enter OnlineEX P-CLEANW IRE- CLEAND1MFD2D3 D4EXITPFCOPY DENSITY MENU EN TER RESET→← *PAPER DECKCUT S ELECT1 2 3 4