Page 9 of 28 701P42081Network Scanning:• The user selects • A login/password popup will be displayed to authenticate users with the Kerberos server.• User enters the login and password.• The login and password is passed on to the Kerberos server and if a match is found the user is successfully authenticated.• Through the templates/repositories, the users will enter a valid login/password for FTP/SMB servers. This may or may not be the userlogin/password; rather it is a login/password that is accepted by the FTP/SMB server.• Public templates are accessible to any user. Private templates require a password that may or may not be different from the Kerberospassword.PrerequisiteComplete the Network Installation. Refer to Æ General Network SetupComplete DNS/WINS set up if Host names are provided for the mail servers, rather than IP addresses. Refer to Æ Advanced Network SetupRemote Authentication SetupField Name Description Location ValueRemote Setup login Enable Remote Authentication LUI:System Settings Æ Login setup/AuditronAdministration Æ Remote Login Setup Default:ON:Guest ON:Remote Server IPAddress or Servername.The IP address or the host nameof the Kerberos server.Note: If server host name is usedinstead of the IP address, refer toAdvanced Network Setup forDNS / WINS settings.LUI:System Settings Æ System Settings ÆNetwork Settings Æ RemoteAuthentication_____._____._____._____Ex of the IP address:192.168.1.2Ex of the host name:Ex:...com
