Page 36 Xerox WorkCentre Pro/CopyCentre User GuideLoading paperLoading Paper in Trays 1 - 41. Pull out the paper tray.2. Load the paper neatly in the tray. Do not load paper abovethe maximum fill line mark on the edge guide.3. Ensure that the edge guides are against the top, bottom,and side edges of the paper.4. Push in the paper tray.A pop-up screen may appear on the screen asking you toconfirm the paper stock settings or to load the requiredpaper for the tray. Confirm or change the paper and sizedescriptions as required.Loading paper in Tray 5, the Bypass TrayUse Tray 5 to load special or odd-size stock. Insert paper asshown. Do not load paper above the maximum fill line. Pull outthe extension bar to accommodate paper that is longer thanthe tray. Confirm or change the paper and size descriptions asrequired.Loading Paper in Tray 6, the High CapacityFeederTo load paper, open the cover and wait for the tray to lower.When the paper has been loaded, close the cover to raise thetray. Tray 6 can only handle 8.5 x 11 inch or A4 size paper.NOTE Use the labels for instruction on how to orient special stocksuch as transparencies, labels, or hole-punched stock.056800086C-LKSExtensionbarInsert the paperfor Tray 5Insert paper for Tray 6.
