DocuMate 252 Scanner Userís Guide 21ScanningThe following example of the OneTouch window shows the settingsfor Button 2. The button is set to scan with the scan configurationnamed Color Document and then open ScanSoft PaperPort todisplay the scanned image. The Format and Page(s) option is setto scan in the PDF image format.The settings on the Properties window are:Select Destinationóthe list of applications that can open todisplay the scanned image for the selected button. To configure thelist of available applications, click the Options tab at the top of thedialog box and select the desired options. See ìSelecting Optionsfor a Buttonî on page 35 for more information.NOTE: Some of the options on the OneTouch PropertiesWindow (and other OneTouch windows and dialog boxes) areìgrayed outî and are not available. Grayed out options are notappropriate for your DocuMate 252 scanner. For example, onthe figure below, the option ìUse Document Feederî is selectedand ìgrayed outî because the DocuMate 252 is an ADF scannerand always uses the document feeder, so thereís no reason foryou to select it. If you use the OneTouch application with otherXerox scanners, grayed out options become active, ifappropriate.The Destination Application.This is the application thatopens when you are finishedscanning. The settings thatthe scanner useswhen scanningwith the currentlyselected button(in this casebutton 2).The file format ofthe images ofthe scanneditem.Click to selectoptions.The button number andname.
