Xerox DocuColor 6060 Getting Started

Also see for DocuColor 6060: System guide Cleaning procedure Installation guide Use manual Color management guide

Contents

Xerox DocuColor 6060 Getting Started Manual pdf 19 page image

DOCUSP 3.74XEROX DOCUMENT SERVICES PLATFORM SERIES 3-5GETTING STARTEDPCL6 and PCLXL PCL6 is the next generation of the Hewlett-Packard LaserJetPCL language. PCL XL is a new page description languageby Hewlett-Packard that is part of PCL6. PCL XL isdesigned to optimally match the graphics printingrequirements for GUI-based applications, reducing thenumber of commands required to describe a graphics page. The output from an enhanced PCL XL driver may not be thesame as the output from a standard PCL6 driver. If theoutput is not as expected, the recommended solution is toprint using a PCL5e driver instead. DocuSP 3.7 supports printing PCL XL class 2.1 for color andPCL XL class 2.0 for the black and white printing products. XPPS 3.7 does not provide a PCL XL (PCL6) Xerox customprinter driver. In order to take advantage of the PCL XLfeatures, a native HP PCL XL driver will have to be used.Ensure the driver chosen supports the same class of PCL asthe DocuSP. Even with an HP PCL XL driver that supports the same classof PCL as the DocuSP, some minor compatibility issues maybe seen due to commands within the PCL that are notsupported on the DocuSP controller. Contact your Xeroxcustomer support representative for assistance if necessary. Native HP PCL drivers do not support all of the features ofthe DocuSP-based printer. Any printer specific features canbe programmed at the DocuSP controller after the job hasbeen submitted. DocuSP 3.7 still supports printing PCL 5e and the Xeroxcustom PCL 5e drivers are still available for use.Note: At this time, there are known problems with PCL XL on theDocuSP controller. Xerox encourages you to evaluate jobprinting and integrity using PCL XL. Any and all feedback iswelcome and appreciated.