Do c u Co lo r 80 0 0/ 70 0 0 O p era to r Ma n ua l xiiiS af e ty n o ti c e sMaintenance safety• Do not attempt any maintenance procedure that is notspecifically described in the documentation supplied with yourproduct.• Do not use aerosol cleaners. The use of supplies that are notapproved may cause poor performance of the press and couldcreate a dangerous condition.• Use the supplies and cleaning materials only as directed inthis manual. Keep all materials out of the reach of children.• Do not remove the covers or guards that are fastened withscrews. There are no parts behind these covers that you canmaintain or service.Do not perform any maintenance procedures unless you havebeen trained to do them by a Xerox representative, or unless aprocedure is specifically described in one of the manuals includedwith your press.Operational safetyYour Xerox equipment and supplies were designed and tested tomeet strict safety requirements. These include safety agencyexamination, approval, and compliance with establishedenvironmental standards.Your attention to the following safety guidelines will help ensurethe continued safe operation of your product:• Use the materials and supplies specifically designed for yourproduct. The use of unsuitable materials may result in poorperformance of the machine and possibly a hazardoussituation.• Follow all warnings and instructions that are marked on orsupplied with the machine.• Place the machine in a room that provides adequate space forventilation and servicing.• Place the machine on a level, solid surface (not on a thick pilecarpet) that has adequate strength to support the weight of themachine.• Do not attempt to move the machine. A leveling device thatwas lowered when your machine was installed may damagethe carpet or floor.• Do not set up the machine near a heat source.• Do not set up the machine in direct sunlight.
