Xerox ® DocuMate® 5445 / 5460User’s Guide86PaperPortIn the One Touch Properties window, select PaperPort as the Destination Application for scanning.Supported file types—all image file formats are available when scanning to PaperPort. The sPDF and nPDF text fileformats are only available when the OmniPage software or One Touch OmniPage module is installed. Please refer toText Formats on page 72.Destination type—the PaperPort destination is classified as a “Document Management Link”. To make it availablein the destination list, you must select Document management on the Options tab in the One Touch Propertieswindow.• Click the Properties button to open the One Touch Link Properties for PaperPort. From this window, you canchange the default folder location and options.On initial installation of One Touch, all scan configurations send the scanned document to the folder selectedin this window. When you create new configurations, the default settings will also match what you haveselected here. If you modify the options in an individual configuration, changing the options in this LinkProperties window will no longer update to the configurations you modified.• Click the New, Copy, or Edit button to open the Scan Configuration Properties window. Click on the PaperPorttab and use this window to set a configuration to scan to a different folder than the one selected in the LinkProperties window.Changing the options in this window only affects the configuration you are creating or modifying. All otherconfigurations will retain their settings for this destination.
